Autel MS908P do online SCN coding to Mercedes W169

Generally, there are two options to perform Mercedes-Benz SCN coding:

– with Star diagnostics, e.g. SD connect c4 with XENTRY/DAS (you can get it from http://www.mbstartool.com/)

– by using full diagnostic systems like Autel MS908P (the only full system for programming in the market)

 

Here take Mercedes W169 032 to do scn coding using AUTEL MS908P kit.

 

Note:

Make sure stable and enough power for use

Well connect Autel MS908P diagnostic system and J2534 ECU programmer (Autel MS908P contain J2534 ECU Programmer)with the car

 

Part 1 – confirm vehicle info

Select Diagnosis-> Europe-> Benz

 

->Automatic selection->turn on ignition->reading VIN…system initializing->get VIN->select vehicle month/year->select steering

confirm vehicle profile

 

Part 2 – Control module programming

Select Programming->data loading…system initializing->ME-SFI-Gasoline engine control->system initializing->Control module programming->read the warning notes->Bluetooth is forced to stop for online stabilization->check vin->establishing vehicle communication…checking network->No newer control module-> Control module programming was aborted

 

Part 3 – SCN coding

Select SCN Coding->Bluetooth is forced to stop for online stabilization->check vin->read scn procedure

 

Step 1 – get scn data from server

->establishing vehicle communication…checking network-> get scn data from server (COMPLETED)

Step 2 – perform scn coding

->establishing vehicle communication->coding is being carried out->control module reset->perform scn coding (COMPLETED)

Scn coding is completed successfully!

 

Save

Save