How to clone VAG VW Audi Bosch 6HP gearbox TCU using Yanhua Mini ACDP2/ACDP1.
You will need module 32 with interface board.
Procedure:
Power Yanhua Mini ACDP1 or ACDP2
Run Mini ACDP App
Check if device is connected
Go to Module->K-line module clone
Select 6HP Bosch (VAG) and check Help for the wiring diagram
Connect ACDP or ACDP2 with TCU via module 32 interface board
Select 6HP Bosch (VAG)
Identify
Identify module information and save info.
Read chip information and save.
Finish identifying chip info.
Select Full backup data
Save backup data
Connect another Audi 6HP gearbox with ACDP following the same wiring diagram
Read chip data of the donor TCU and save.
Select Full write data
Select original 6hp data and write to the donor TCU
Save new gearbox data.
Done.
Video reference:
Source link
